Ultrasonic Fuel Level Sensor Ultrasonic Level Sensor Ultrasonic Distance Sensor
| Ultrasonic sensor | Low power-sensor | Middle power-sensor | Large power-sensor |
| The Max. range | ≤5m | ≤7m | ≤10m | ≤10m | ≤12m | ≤15m |
| Blind area | Standard: 300mm | 350mm | 500mm | 500mm | 600mm | 800mm |
| OEM:200mm |
| Power supply | Standard: DC24V | DC24V | DC24V | DC24V | DC24V | DC24V |
| OEM:DC12V, AC220V | / | OEM:DC12V, AC220V | / |
| Beam angle | 15° | 12° | 9° |
| Operating frequency | 38K±10Khz | 55K±10Khz | 40K±5Khz |
| Accuracy | Standard: ±0.5%F S or ±5mm; (at 25℃, Absolutely flat target under the condition of standard) |
| OEM: FS≤1m, accuracy can be ±1mm FS≤2m, accuracy can be ±3mm FS≤15m, accuracy can be ±0.25% FS |
| Output signal | Standard: 4-20mA (3 wires) |
| OEM: 4-20mA(4 wires), 0-20mA, 0-5v, 1-5v 0-10v, 1-10v (both signal can not be customized DC12v) RS485(MCU protocol as default, Address=01, bps=9600) 4-20mA+RS485; 1-5V+RS485, 1~2NPN 1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM |
| Measuring mode | Standard: Distance mode, the distance of ultrasonic sensor surface to measuring target surface |
| OEM: Level mode; the distance of level surface to level bottom(the bottom of tank) NOTE: Ensuring the distance of sensor surface to the level bottom is the actual mounting height, otherwise might be have installation error. |
| Working temp. | Standard: 0~50℃ |
| OEM: Negative Temp. -10℃,-20℃,-30℃; Positive Temp. 60℃,70℃,80℃ |
| Wiring Mode | Quick connect type terminal(can be customized cable outlet about 1m) |
| Installation | Screw type or sifter clamping ; screw size: M68*2.0mm |
| Protection class | IP65, OEM of IP66, IP67, IP68 |
| Working environment | Normal pressure, non-explosion-proof; non-corrosive environment |
| OEM: Anti-explosion symbol Exia II AT3 (DC12 V,range≤10m ) The material sensor housing: PTFE for large power sensor Strong in corrosion resistance |
| NOTES | 1.When level range ≥15m, equip with other type ultrasonic sensors 2.Users no need to set the address, bps, installation height, so please verify to factory before ordering 3.For RS485-PC product, users can adjust the parameter by software(the default software) The max measure range depends on the smooth level surface, so please confirm the real |
The ultrasonic level transmitter is a non-contact,low-cost and easy-to-install measuring device. It can be applied to most industrial applications for both solids and liquids. Most important aspect of is that it is easy-to-install and low maintenance due to no moving parts.
During operation, the device emits a wave to the medium to be measured. The wave reflects off the surface and moves back to the device where a transducer calculates the distance. The distance is based on the time interval between transmission and reception of the wave. D= (334.1+0.6t) x T/2, where the D = the transmission distance; t = temperature; and T= transmission time. With 4~20mA output, it can be connected to the PLC,DSC and SCADA systems. In addition, it is
also equipped with exclusive PULSE and AGC (Auto Gain Control) echo tracking technology to ensure accuracy and precision even in the harshest environments.
Feature
● Non-contact measurement
● Convenient installation
● High stability and long-term reliability
● Waterproof, dustproof, anti-corrosion
● Intrinsic safety, explosive-proof
Applications
● Depth well level measurement
● Industrial tanks
● Detection of tanker oil level
● Water treatment
● Hydraulic monitoring
● High pool level
Notes for selection range of ultrasonic level sensor:
For example, in a tank for measuring the level of hydrochloric acid, due to the strong volatility of the medium, the air in the tank may suspend a large amount of fine liquid particles, causing some sound waves of the ultrasonic level gauge to scatter. For this phenomenon, when the liquid drops to a lower position, the ultrasonic level gauge may not receive echo. Therefore, it is recommended that the user increase the measurement distance by 30-50% when selecting the range. For example, for a 6-meter-high tank, it is best to select a 10-meter Uson-11 ultrasonic liquid level meter for measurement.
Dimension
FAQ
1.Q: How long is the delivery?
-- Mostly within 10days
2.Q:Can I get a sample?
-- Sure, contact our sales please
3.Q:What is your MOQ?
-- 1pcs
4.Q: How about warranty time?
-- 12-18month
5.Q: How can I visit your factory?
-- Fly to Xian Yang air port, it’s our pleasure to pick you up.
6.Q:How do you control your quality ?
-- We have EPR system .we control from parts, process, testing, packing ,retesting.
7.Q: Do you have test report for each product?
-- Yes,we have test report for each product.
8.Q: Can you customize product for us according to our required specifications?
-- Yes,we are OEM manufacturer,we could customize products according to your required specifications.
Every Sensor will be tested two times before reach you, after that sport test for the third time. Make sure about the quantity.
Ordering guide:
In order to recommend the suitable sensor, please kindly advise us the following information
1..What is your testing medium ? oil, water, gas, waster water, or others.
2.Working temperature of the sensor ? -40°C~100°C or others
3.Pressure range ? -1-0bar,0-1bar,0-16bar,0-40bar,0-100bar,0-600bar or others
4.Output signal? 4-20mA, 0-5V ,0.5-4.5V,0-10V,RS485 or other
5.Electronic connection ? DIN43650 ,Packard, Aerial plug, direct cable or others.
6.Screw ? M20×1.5,G1/4,G1/2,R1/2,NPT1/2
Product Tags:
|
|
Fuel Ultrasonic Level Sensor Anti Explosion Ultrasonic Distance Sensor IP65 Images
|
